SLIT PLANK TYPE FLOORING
Slit plank type flooring has high load-bearing capacity, which means the support beams can be placed further apart, and thus, installed at a lower cost.
Slit plank type flooring can be used for most types of industrial flooring, gangways, treads, etc. Thanks to its serrated top, slit plank type flooring offers very good anti-slip protection and lets through dirt, oil and other spillages. Because of this, slit plank type flooring does not normally require cleaning. Cutting of the slit plank type flooring’s longitudinal measurement is based on the 15 mm separation between meshes. For example, length 2600 mm, separation 15 mm = 2595 or 2610 mm. Slit plank type flooring has high load-bearing capacity, which means the support beams can be placed further apart, and thus, installed at a lower cost. More information about loads for slit plank type flooring.
Slit plank type flooring
Slit plank type flooring is manufactured as “planks”, which means that even longer planks are easy to handle during assembly. The “planks” are never that heavy that one man cannot carry them. After laying, the slit plank type flooring is secured with fixings available for plank heights 40 and 70 mm.
Slit plank type flooring is manufactured as standard with serrated slits, which provides the maximum anti-slip protection.
In certain environments, there is a requirement that a 15 mm diameter ball cannot fall through the grating. Slit type plank flooring has a mesh opening of 45 x 14 mm.
Slit plank type flooring is manufactured as standard from 2 mm sheet metal. The manufacturing process is completely automated and starts with coils (sheet metal on rolls). The sheet metal is punched, folded and cut into slit plank type flooring.
When ordering, slit plank type flooring can be cut and supplied with edging bars. The maximum length that can be formed is 4000 mm.
Stocked length, 3000 mm.
| Width x height (mm) | Part no. | Surface treatment | Stocked |
|---|---|---|---|
| 130 x 40 | SD1304020 | Untreated | |
| 130 x 40 | SD13040201 | Hot dip galvanized | |
| 130 x 70 | SD1307020 | Untreated | |
| 130 x 70 | SD13070201 | Hot dip galvanized | |
| 190 x 40 | SD1904020 | Untreated | |
| 190 x 40 | SD19040201 | Hot dip galvanized | |
| 190 x 70 | SD1907020 | Untreated | |
| 190 x 70 | SD19070201 | Hot dip galvanized | |
| 250 x 40 | SD2504020 | Untreated | |
| 250 x 40 | SD25040201 | Hot dip galvanized | |
| 250 x 70 | SD2507020 | Untreated | |
| 250 x 70 | SD25070201 | Hot dip galvanized | |
| 310 x 40 | SD3104020 | Untreated | |
| 310 x 40 | SD31040201 | Hot dip galvanized | |
| 310 x 70 | SD3107020 | Untreated | |
| 310 x 70 | SD31070201 | Hot dip galvanized | |
| 370 x 40 | SD3704020 | Untreated | |
| 370 x 40 | SD37040201 | Hot dip galvanized | |
| 370 x 70 | SD3707020 | Untreated | |
| 370 x 70 | SD37070201 | Hot dip galvanized | |
| 430 x 40 | SD4304020 | Untreated | |
| 430 x 40 | SD43040201 | Hot dip galvanized | |
| 430 x 70 | SD4307020 | Untreated | |
| 430 x 70 | SD43070201 | Hot dip galvanized | |
| 500 x 40 | SD5004020 | Untreated | |
| 500 x 40 | SD50040201 | Hot dip galvanized |
Slit plank type flooring in EN 1.4404 stainless steel is manufactured in 1.5-mm thick material, in plank widths of up to 250 mm.
| Width x height (mm) | Part no. |
|---|---|
| 130 x 40 | SDR13040 |
| 130 x 70 | SDR13070 |
| 190 x 40 | SDR19040 |
| 190 x 70 | SDR19070 |
| 250 x 40 | SDR25040 |
| 250 x 70 | SDR25070 |
Slit type plank flooring in aluminium is manufactured in 3-mm thick material in widths of up to 370 mm.
| Width x height (mm) | Part no. |
|---|---|
| 130 x 40 | SD13040 |
| 130 x 70 | SD13070 |
| 190 x 40 | SD19040 |
| 190 x 70 | SD19070 |
| 250 x 40 | SD25040 |
| 250 x 70 | SD25070 |
| 310 x 40 | SD31040 |
| 310 x 70 | SD31070 |
| 370 x 40 | SD37040 |
Accessories, Slit Plank Type Flooring
Slit plank type flooring should be anchored to the supporting structure. This can be done in various ways. Here are some of the alternatives we recommend. Slit plank type flooring fixings are available as both complete and separate components.
Accessories
When ordering, slit plank type flooring can be cut and supplied with edge bar on the end of the profile.
| Name | Grating height | Part no. |
|---|---|---|
| Edging bar | H=40 | SDK40 |
| Edging bar | H=70 | SDK70 |
Complete clamp in three parts for fixing slit plank type flooring. Top section, screw (M8) and nut. Available in screw lengths 70 and 100 mm. Hot dip galvanized top section. Screw and nut are in stainless steel. Holes must be drilled in the supporting beams. Stocked.
Suitable for plank types: Slit plank type flooring with 40 and 70 mm height.
Finish: Hot dip galvanized
| Name | For grating height (mm) | Part no. | Stocked |
|---|---|---|---|
| Complete clamp | 40 | 1634002 | |
| Complete clamp | 70 | 1637002 |
Complete clamp in four parts for fixing slit plank type flooring. Top part, bottom part, screw and nut. Available in screw lengths 70 and 100 mm. Hot dip galvanized top and bottom section. Screw and nut are in stainless steel. Installed without drilling into the supporting structure. Stocked.
Suitable for plank types: Slit plank type flooring with 40 and 70 mm height.
Finish: Hot dip galvanized
| Name | For grating height (mm) | Part no. | Stocked |
|---|---|---|---|
| Complete clamp | 40 | 1634001 | |
| Complete clamp | 70 | 1637001 |
Top section for slit plank type flooring and plank type flooring LDS.
Finish: Hot dip galvanized
| For plank type | Dimensions (mm) | Surface treatment | Part no. | Stocked |
|---|---|---|---|---|
| Slit grating | 22 x 60 | Hot dip galvanized | 16360221 |
