Planning and design, Universal railing

UNIVERSAL RAILING, PLANNING AND DESIGN

The railings are normally delivered from stock and are easily adapted by the fitter. This makes it possible to install without making detailed measurements prior to delivery. If the railings are to be delivered customised from the factory, each sectional railing is drawn up specially and the drawing is sent to the customer for approval prior to manufacturing.


Assembly

For joining Universal railing, there are many different assembly accessories available based on your needs.


Fixing, Top Installation

Intended to be screwed into e.g. wood or concrete. Can be welded in place.
To secure the railing post, a bolt, a locking washer and a nut are required.
Finish: Hot dip galvanised

Name Dimensions (mm) Part no. Stocked
Single 125 x 125 x 108 UG1000
Double 200 x 125 x 108 UG2000

Fixing, Side Installation

Intended to be screwed into e.g. wood or concrete. Can also be welded in place.
The side brackets are available in right and left hand versions. The right bracket is located to the right when looking at the installation side. The fixing has a serrated post to facilitate installation at the correct height.
To secure the railing post, a bolt, a locking washer and a nut are required.
Finish: Hot dip galvanised

Name Dimensions (mm) Part no. Stocked
Left 80 x 35 x 280 UV1001
Right 80 x 35 x 280 UV1002

Fixings Top & side installation

Fixings Top & side installation.

Name Part no. Stocked
Locking washer, 10 pcs. UL4201
Bolt set, 10 pcs. BU1201
Nut, set 10 pcs. MU1001

Wall mount

For ending the railing against a wall or post. The wall mount is available for handrails and intermediate rails.
Finish: Hot dip galvanised

Name Dimensions (mm) Part no. Stocked
Bracket handrail 35 x 59,2 UV4200
Bracket intermediate rail 20 x 39,7 UV2700

Ground mount

The mount is manufactured from folded sheet metal and it provides stable fixing when sunk into the ground with macadam or crushed stone in the pit. The mount can also be used for embedding in concrete.
The mount is available in single and double versions.
Finish: Hot dip galvanised

Name Part no. Stocked
Ground attachment, single 42 mm UM1000
Ground attachment, double 42 mm UM2000

Kick strip

Kick strips are available for all railing lengths, as well as for railing corners. The kick strip is attached to the railing bow using self-tapping screws.
Height: 100 mm
Finish: Hot dip galvanised

 

Name Length (mm) Part no. Stocked
Kick strip 390 SL0410  
Kick strip 490 SL0510  
Kick strip 690 SL0710  
Kick strip 990 SL1010  
Kick strip 1490 SL1510  
Kick strip 1990 SL2010  
Kick strip, Corner railing 335,6 x 335,6 SL4040  

Concrete base

Stable concrete base with embedded handles and two holes.

Name Dimensions Height (mm) Part no. Stocked
Concrete base 350 x 240 125 BF2000

Connection Corner connection

Connection between railings is carried out by linking them together with a sleeve and a through bolt. All railings have pre-drilled holes. Railings that are not installed in a straight line are linked together with a corner connection that clamps around the railing balusters.
Finish: Hot dip galvanised

Name Part no. Stocked
Coupling KP4277
Corner coupling MK4200

Internal pin

Used for embedding in the floor structure, walls or if you want to weld to the edge of the floor structure. Can also be used to extend the extension pin down into the sleeve that lies flush with the floor. The pin is locked to the railing with a bolt, nut and washer to the railing baluster in the same way as other brackets.
Finish: Hot dip galvanised

Name Length (mm) Part no. Stocked
Invändig tapp 310 UT3100

Railing joint

For joining railing and intermediate rails.
Finish: Hot dip galvanised

Name Part no. Stocked
Splice kit 42 mm hdg. SK4200
Splice kit tube 27 mm hdg. SK2700