Slit plank type flooring

SLIT PLANK TYPE FLOORING

Slit plank type flooring has high load-bearing capacity, which means the support beams can be placed further apart, and thus, made cheaper.


Slit plank type flooring can be used for most types of industrial flooring, gangways, treads, etc. Thanks to its serrated top, slit plank type flooring offers very good anti-slip protection and lets through dirt, oil and other spillages. Because of this, slit plank type flooring does not normally require cleaning. Cutting of the slit plank type flooring's longitudinal measurement is based on the 15 mm separation between meshes. For example, length 2600 mm, separation 15 mm = 2595 or 2610 mm. Slit plank type flooring has high load-bearing capacity, which means the support beams can be placed further apart, and thus, made cheaper. More information about loads for slit plank type flooring.

Slit plank type flooring

Slit plank type flooring is manufactured as "planks", which means that even longer planks are easy to handle during assembly. The "planks" are never that heavy that one man cannot carry them. After laying, the slit plank type flooring is secured with fixings available for plank heights 40 and 70 mm.
Slit plank type flooring is manufactured as standard with serrated slits, which provides the maximum anti-slip protection.
In certain environments, there is a requirement that a 15 mm diameter ball cannot fall through the grating. Slit type plank flooring has a mesh opening of 45 x 14 mm.

Slit plank type flooring is manufactured as standard from 2 mm sheet metal. The manufacturing process is completely automated and starts with coils (sheet metal on rolls). The sheet metal is punched, folded and cut into slit plank type flooring.

When ordering, slit plank type flooring can be cut and supplied with edging bars. The maximum length that can be formed is 4000 mm.

* Stocked length, 3000 mm.

Width x height (mm) Part no. Surface treatment
130 x 40* SD1304020 Untreated
130 x 40* SD13040201 Hot dip galvanized
130 x 70* SD1307020 Untreated
130 x 70 SD13070201 Hot dip galvanized
190 x 40* SD1904020 Untreated
190 x 40* SD19040201 Hot dip galvanized
190 x 70* SD1907020 Untreated
190 x 70 SD19070201 Hot dip galvanized
250 x 40* SD2504020 Untreated
250 x 40* SD25040201 Hot dip galvanized
250 x 70* SD2507020 Untreated
250 x 70 SD25070201 Hot dip galvanized
310 x 40* SD3104020 Untreated
310 x 40* SD31040201 Hot dip galvanized
310 x 70* SD3107020 Untreated
310 x 70 SD31070201 Hot dip galvanized
370 x 40* SD3704020 Untreated
370 x 40* SD37040201 Hot dip galvanized
370 x 70* SD3707020 Untreated
370 x 70 SD37070201 Hot dip galvanized
430 x 40* SD4304020 Untreated
430 x 40* SD43040201 Hot dip galvanized
430 x 70* SD4307020 Untreated
430 x 70 SD43070201 Hot dip galvanized
500 x 40* SD5004020 Untreated
500 x 40* SD50040201 Hot dip galvanized

Slit plank type flooring in EN 1.4404 stainless steel is manufactured in 1.5-mm thick material, in plank widths of up to 250 mm.

Width x height (mm) Part no.
130 x 40 SDR13040
130 x 70 SDR13070
190 x 40 SDR19040
190 x 70 SDR19070
250 x 40 SDR25040
250 x 70 SDR25070

Slit type plank flooring in aluminium is manufactured in 3-mm thick material in widths of up to 370 mm.

Width x height (mm) Part no.
130 x 40 SD13040
130 x 70 SD13070
190 x 40 SD19040
190 x 70 SD19070
250 x 40 SD25040
250 x 70 SD25070
310 x 40 SD31040
310 x 70 SD31070
370 x 40 SD37040

Accessories, Slit Plank Type Flooring

Slit plank type flooring should be anchored to the supporting structure. This can be done in various ways. Here are some of the alternatives we recommend. Slit plank type flooring fixings are available as both complete and separate components.

Accessories

When ordering, slit plank type flooring can be cut and supplied with edge bar on the end of the profile.

Name Grating height Part no.
Edging bar H=40 SDK40
Edging bar H=70 SDK70

Complete clamp in three parts for fixing slit plank type flooring. Top section, screw (M8) and nut. Available in screw lengths 70 and 100 mm. Hot dip galvanised top section. Screw and nut are in stainless steel. Holes must be drilled in the supporting beams. Stocked.

Suitable for plank types: Slit plank type flooring with 40 and 70 mm height.
Finish: Hot dip galvanised 

Name For grating height (mm) Part no. Stocked
Complete clamp 40 1634002
Complete clamp 70 1637002

Complete clamp in four parts for fixing slit plank type flooring. Top part, bottom part, screw and nut. Available in screw lengths 70 and 100 mm. Hot dip galvanised top and bottom section. Screw and nut are in stainless steel. Installed without drilling into the supporting structure. Stocked.

Suitable for plank types: Slit plank type flooring with 40 and 70 mm height.
Finish: Hot dip galvanised

Name For grating height (mm) Part no. Stocked
Complete clamp 40 1634001
Complete clamp 70 1637001

Top section for slit plank type flooring and plank type flooring LDS.

Finish: Hot dip galvanised

For plank type Dimensions (mm) Surface treatment Part no. Stocked
Slit grating 22 x 60 Hot dip galvanized 16360221

Documentation


Load table Slit plank type flooring