Platform with plank type flooring

PLANK TYPE FLOORING

Plank type flooring is used for all types of industrial flooring, mezzanine floor structures, gangways, etc. Plank type flooring can cross spans of up to 2 metres.


Plank type flooring is used for all types of industrial flooring, mezzanine floor structures, gangways, etc. The plank type flooring can cross spans of up to 2 metres, which means that the supporting beams can be placed further apart and the assembly is faster. Plank type flooring can cross spans up to 2 metres, which allows the beam supporting structure to be placed wider apart and the installation to be faster. More information about loads for plank type flooring.

Profiles, Plank type flooring

Plank type flooring is manufactured in 2 different profiles and 3 different widths. We can supply plank type flooring in different lengths, up to 6000 mm.  

Plank type flooring has a construction profile that is 300 mm wide. The profiles hook into each other and are locked during installation.

End profiles are used to obtain the exact width and as a finish along the edges. The desired construction dimensions can be obtained by using the construction profiles.


Plank types, plank type flooring

Plank type flooring is manufactured in 4 different patterns with unique characteristics and applications.

Characteristics: This plank type has an embossed pattern offering good anti-slip protection.

Application: Wherever a closed floor is needed. Because the planks are closed, insulation can be installed in or under the planks. The 6000 mm length is held in stock.

 

Building Profiles Border Profiles
300 mm 200 mm
300 mm 250 mm
300 mm 300 mm

Characteristics: In principle, it is a closed plank type flooring that is supplemented with punched oval holes, 15x69 mm, to let through light, dirt and liquids.

Application: Whenever a relatively smooth, yet pervious floor is required. Suitable when, for example, wheeled objects will be moved across the floor. The 6000 mm length is held in stock.

 

Building Profiles Border Profiles
300 mm 200 mm
300 mm 250 mm
300 mm 300 mm

Characteristics: Just like LDH, a plank type with great permeability for dirt and liquids. The serrated top provides extremely good anti-slip protection.

Application: Wherever there are strict requirements for anti-slip protection. The 6000 mm length is held in stock.

 

Building Profiles Border Profiles
300 mm 200 mm
300 mm 250 mm
300 mm 300 mm

Characteristics: Very good anti-slip protection, but not as great a permeability as LDS. This type has smaller openings (holes Ø 10 mm and 4 mm drain holes) and thus provides more safety from objects falling through the openings.

Application: Wherever there are strict requirements for anti-slip protection and where it is not permitted for objects to fall through the openings. The 6000 mm length is held in stock.

 

Building Profiles Border Profiles
300 mm 200 mm
300 mm 250 mm
300 mm 300 mm

Accessories, plank type flooring

As accessories, there are a number of different parts that facilitate the installation as well as the use of the plank type flooring.

Kick strip LK140 is a special profile, located at all openings and all outer edges of the plank. Fastens to the plank type flooring using screws.

Outside and inside corners at 90° angles are available for kick strips.

Installed in the joints between the planks (LDT) as a seal and to provide sound and vibration insulation.

Profile LU43 is used as reinforcement, plank edging and as a border profile in the case of longitudinal cutting of the plank.


Surface treatment

Plank type flooring is delivered as standard hot dip galvanised according to SS-EN ISO 1461. For more information, please visit our page for surface treatment.

Hot dip galvanised



Documentation


Installation instructions Plank type flooring LDH, LDT, LDS & LDP